Eclipse - Fujitsu Ten Mainboard D2140 Manuel d'utilisateur télécharger pdf (Page 28)

Upgrading main memory

A26361-D2140-Z120-1-7419, edition 1 English - 19

Upgrading main memory

Technical data

Technology: DDR 333 or DDR 400 unbuffered DIMM modules

184-Pin; 2.5 V; 64 Bit, without ECC

Size: 128 Mbyte to 2 Gbyte 333 DDR-SDRAM

128 Mbyte to 2 Gbyte 400 DDR-SDRAM

Granularity: 128, 256, 512 or 1024 Mbyte for one socket

A current list of the memory modules recommended for this mainboard is available on the Internet

at: www.fujitsu-siemens.com/mainboards.

At least one memory module must be installed. Memory modules with different memory capacities

can be combined.

You may use unbuffered 2.5 V memory modules without ECC. DDR-DRAM memory

modules must meet the PC2700 or PC3200 specification.

Installing a memory module

► Push the holders on each side of the memory slot outwards.

► Insert the memory module into the location (1).

► At the same time flip the lateral holders upwards until the memory module snaps in place (2).

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Pas de commentaire

Eclipse - Fujitsu Ten Mainboard D2140 Manuel d'utilisateur Page 28